Getting Bike Gear Ready for Winter
Craig Waller

Winter does not mean the same thing for every rider. You might be putting the bicycle away for a while, keeping the van ready for local rides, or heading somewhere warmer.
Whichever plan fits your season, this is a useful time to take stock of the bike gear before the next hurried departure.
Decide what will be stored and what will stay in use
Start with your likely plans. If the bicycle and its mounting equipment will be stored, gather the care and storage instructions for each item. If you will keep traveling, make the same review part of your next-trip preparation.
Different bicycles, forks, accessories and mounting systems can have different requirements. Use the instructions for the equipment you own rather than relying on one winter routine for everything.
Account for the small parts
Fork adapters, straps and other removable pieces are easy to lose track of between trips. Lay out the parts that belong to your setup and compare them with its instructions or parts list.
Keep the items together in a labeled place, with a note identifying the bicycle and mount they belong to. If you have more than one bicycle or Bike-Hook configuration, avoid mixing up the adapters and assuming they are interchangeable.
The front-fork mounting guide is a useful starting point when you are identifying what you have. Confirm any replacement or changed component against the current requirements.
Write down anything that needs attention
Use the inspection steps in the relevant instructions to check your equipment. Note missing pieces, damaged protective material or anything that no longer works as expected. Take a clear photo of an issue so you can explain it when asking for help.
Do not put an unresolved problem away and expect to remember it months later. A short note with the stored gear can save you from rediscovering it on the morning of a trip.
For Bike-Hook's vehicle contact areas, our contact-protection guide explains the role of tape and padding. Confirm the correct cleaning, replacement and storage guidance before treating those materials.
Let the equipment instructions guide the winter care
Check the bicycle manufacturer's guidance for storage and service. Do the same for any e-bike battery and charger, following the instructions for the specific model. If a step is unclear, ask the manufacturer or a qualified bicycle service provider.
For the mounting equipment, use Bike-Hook's current care guidance. Do not choose a cleaner, lubricant, coating or storage arrangement simply because it works on another piece of outdoor gear.
[CRAIG: Add the approved Bike-Hook winter-care guidance here, if available. Confirm cleaning products and methods, drying and storage requirements, whether the mount should remain on the vehicle, inspection/replacement criteria for straps and protective materials, and any cold-weather limits. No specific maintenance interval or treatment has been assumed.]
Leave a note for the first ride back
Write a small restart list: check the stored parts, review any unresolved issue, confirm the fit if a bicycle or vehicle has changed, and repeat the installation and pre-departure checks.
It is a good time to bookmark the Bike-Hook FAQ and the instructions you use most. The point is to make the next setup deliberate, even if the last ride was a while ago.
A little organization now means less searching for a missing part when it is time to ride again.
🔗 Ready to Ride?
Shop All Bike-Hook Products
https://www.bike-hook.com/shop
What is BIKE-HOOK
https://bike-hook.com/blogs/news/what-is-bike-hook
Don’t See Your Van Listed, We Can Fit You
https://bike-hook.com/blogs/news/don-t-see-your-van-listed-3-simple-measurements-for-a-custom-fit-bike-hook
Frequently Asked Questions - FAQs ???
https://bike-hook.com/blogs/news/bike-hook-faq-campervan-bike-storage-questions-answered
