Hatch-Hook: From Idea to Reality
Craig Waller

The original Bike-Hook was designed around a van's rear doors. A hatchback or liftgate presents a different mounting problem, and that difference became the starting point for Hatch-Hook.
The goal was familiar: keep the system compact and removable. Getting there meant rethinking how the bicycle and vehicle-side mount connect.
The problem was access
With the original rear-door system, the open door gives access to the mounting edge during loading. A liftgate moves differently. The mounting area and the loading sequence could not simply be treated like a pair of rear barn doors.
In our June 2026 article, We Finally Solved the Hatchback Problem, we described the design challenge and the two-piece prototype developed in response.
One system, two separate pieces
The prototype separated the vehicle-side mounting base from the section attached to the bicycle's front fork.
The idea was to fit the base while the hatch was open, close the hatch, and then connect the fork-mounted section to that base. Separating those steps addressed the access problem without requiring the bicycle to be loaded in the same way as the rear-door Bike-Hook.
That is a description of the published development concept, not an installation procedure. The final mounting steps and fit requirements need to come from the instructions for the particular vehicle and bicycle.
From the workshop to prototype field testing
In July 2026, we announced that the first production prototypes had entered field testing in the United Kingdom. That update described testing as a step toward gathering feedback and making any final refinements.
It also explained the travel idea behind the project: a compact mount that a cyclist could take along on a trip. That was a design goal, not a promise that any rental SUV or hatchback would be suitable.
What has changed since then?

Fit remains a specific question
“Hatchback,” “SUV” and “crossover” describe broad categories of vehicles. They do not establish that a mounting system fits an individual rear hatch.
If you are interested in Hatch-Hook, begin with the exact vehicle and bicycle details and ask about the current requirements. Do not assume the original rear-door Bike-Hook or a prototype shown in an earlier article is the right configuration for your vehicle.
The story began with a practical access problem. The next useful chapter is a clear account of the finished design, the confirmed fit and what was learned along the way.

🔗 Ready to Ride?
Shop All Bike-Hook Products
https://www.bike-hook.com/shop
What is BIKE-HOOK
https://bike-hook.com/blogs/news/what-is-bike-hook
Don’t See Your Van Listed, We Can Fit You
https://bike-hook.com/blogs/news/don-t-see-your-van-listed-3-simple-measurements-for-a-custom-fit-bike-hook
Frequently Asked Questions - FAQs ???
https://bike-hook.com/blogs/news/bike-hook-faq-campervan-bike-storage-questions-answered